Anschütz air rifle model 9015 Alu
The new 9015 barreled action was developed based on the successful ANSCHÜTZ 9003 Premium air rifle barreled action. With optimised air pressure control characteristics, a new patented 5065 4K trigger with ball bearings and versatile adjustable trigger blade, a stainless steel barrel unit and the thin, special coated barrel extension, also made of stainless steel, this barreled action will replace all former ANSCHÜTZ air rifle barreled actions in the future.
- Maintenance free stabilizer.
- Revolutionary firing pin and valve system for even calmer shot release.
- Optimised flow behaviour.
- Recoil and vibration free compressed air barreled action.
- Extremely short lock time.
- Precisely adjustable match trigger with axial ball bearing.
- Optimised cocking.
- Special concept for dry firing and safety.
- Air filter against pollutions.
- Maintenance-friendly system.
- Easily exchangeable compressed air cylinder with manometer.
- Adjustable trigger blade.
- Cocking lever mountable left and right.
Caliber: 4.5 mm
Rifling (mm): 420
Length of twist (inch): 480
Number of grooves: 12
Barrel length (mm): 420
Length of the barrel unit (mm): 592
Length of aiming (mm): 620 - 897
Muzzle diameter (inch): 22
Length of barreled action (mm): 734 - 844
Weight (g): 2400
ANSCHÜTZ match triggers have always set new standards of quality, reliability and precision. With the newly developed and patented 5065 4K trigger, ANSCHÜTZ presents top-class sport with a mechanical trigger that goes above and beyond all previ- ous ANSCHÜTZ triggers. It could probably be said that it is the best mechanical trigger in the world. The patented 5065 4K trigger impresses with its unprecedented extremely short trigger release time. The axial ball bearing (4K = 4 bearing balls, marked in yellow) on the trigger lever guaran- tees completely play-free trigger blade mounting. The resulting harmonic, even-running first stage travel leaves no desires unfulfilled. The very clear contrast when achieving the two stage gives the shooter a very precise contact with the shot.
Type: Two stage trigger
Tilting range (mm): 11
Adjustment of the trigger shoe (mm): 23,5
Trigger blade: 007434
Color of the trigger shoe: Silver
Trigger weight, adjusted (g): 100
Adjustment of the trigger weight (mm): 30-170
Rear Sight 6805 with anti-glare tube.
Rear sight housing made of aluminum.
Front sight rotationally adjustable.
Incl. aperture clamping screw and transparent aperture (Ø M18).
Sight raiser block (mm): 8
Type: Rear sight and front sight
Aluminuim grooved rail on the lower side: yes
Total length (mm): 650
Weight (g): 2200
Clamping piece at the cheek: yes
Butt plate: yes
Butt plate: 4759
Stock color: anthracite/black or anthracite/natural-blue
Length of stock (mm): 310 - 360
Grip material: PRO-Grip or Laminated wood
Grip color: black or natural-blue
Incl. screws, especially for ANSCHÜTZ rifles.
Alu Butt Plate 4759/4758:
For many shooters the radius at the butt plate is too large. The result is that the butt plate does not fit the shoulder correctly. The butt plate models 4759 and model 4758 offer a solution for this problem. The variable adjustment of shoulder with (only model 4759) and tilting range allow a perfect fit. The aluminum butt plate can be screwed on directly to all stocks with straight stock ends.
Light, extra strong aluminum design.
Angle adjustments directly at the butt plate and therefore no angle errors.
All butt plate adjustments correspond to the ISSF rules.
Variable and individual adjustments.
Easy handling of adjustment elements.
Scales for reproducing adjustments quickly.
Model 4759, no-slip profile in the shoulder area.
Vertically and horizontally adjustable, can be tilted.
Further adjusting possibilities with model 4759:
Upper wing angle directly adjustable from the front via new clam ping (see arrow).
Adjustable shoulder width.
Variable length adjustment by column guide 4759-2000 and stop nut.
Adjustable (mm): 60 mm
Weight (g): 225 g
Hook Plate Carrier
Quick re-adjustment of your settings due clear scales and nuts.
In addition the nuts prevents slipping of the butt plate in position and fixing the length adjustment.
Light weight, high strength aluminum construction.
Length adjustment without thread.
Two way height adjustment.
Column distance (mm): 30
Column diameter (mm): 12
Length (mm): 77
Weight (g): 90
Fore-end riser block made out of laminated wood, colored in natural-blue.
Openings for weights.
Aluminum grooved rail for different accessories.
Material: Synthetic or Laminated wood
Adjustable in height (mm): 9 mm (PRO-Grip)
Length (mm): 248 or 315
Height (mm): 20 or 24
Color: Black or natural-blue
Pistol grip manufactured according to the ISSF rules.
The grip adjustment can be turned, tilted and pushed in any direction.
Delivered with screw.
Material: PRO-Grip or Laminated wood
Color: black or natural-blue
Size: M or L
With trigger guard: yes
Width (mm): 49 mm
Height (mm): 120 mm