Anschütz air rifle 9015 ONE 3-Position
The Model 9015 ONE 3 position is a high-end target air rifle for air rifle 3-position disciplines. The numerous adjustment possibilities of the ONE- stock in combination with the fore-end which is specially developed for the 3-position shooting offers the shooter unprecedented possibilities to get achieve-ments at a top level. The position can be adjusted similar to the small bore target rifle and gives the shooter a familiar feeling.
Delivery volume: Sight set 6834, compressed air cylinder, grip S,ONE-Fore-end for 3 position shooting, hand stop 6226, transport gun case MEGA, 2 ONE-Spacer incl. screws, special grease, 3 ringweights each0.05 lbs, filling adapter, air release screw, protection sleeve for compressed air cylinders, tool set for ONE-stock, O-rings, base for Centra front sight M18, eyeshade, steel column, sight riser block XXL, weight for ONE-stock with 0.22 lbs, ONE-clamping weight for sight line extension with 0.17 lbs, ONE-clamping weight for barrel with 0.11 lbs, instruction leaflet with original test target, service manual, information page - how to use a compressed air cylinder and ONE-Booklet.
The new 9015 barreled action was developed based on the successful ANSCHÜTZ 9003 Premium air rifle barreled action. With optimised air pressure control characteris- tics, a new patented 5065 4K trigger with ball bearings and versatile adjustable trigger blade, a stainless steel barrel unit and the thin, special coated muzzle tube, also made of stainless steel, this barreled action will replace all former ANSCHÜTZ air rifle barreled actions in the future.
- Maintenance free stabilizer.
- Revolutionary firing pin and valve system for even calmer shot release.
- Optimised flow behaviour.
- Recoil and vibration free compressed air barreled action.
- Extremely short lock time.
- Precisely adjustable match trigger with axial ball bearing.
- Optimised cocking.
- Special concept for dry firing and safety.
- Air filter against pollutions. Maintenance-friendly system.
- Easily exchangeable compressed air cylinder with manometer.
- Adjustable trigger blade.
- Cocking lever mountable left and right.
Caliber: 4.5 mm
Rifling (mm): 420
Barrel length (mm): 640
Length of barreled action (mm): 734 - 844
Length of aiming (mm): 620 - 897
ANSCHÜTZ match triggers have always set new standards of quality, reliability and precision. With the newly developed and patented 5065 4K trigger, ANSCHÜTZ presents top-class sport with a mechanical trigger that goes above and beyond all previous ANSCHÜTZ triggers. It could probably be said that it is the best mechanical trigger in the world.
The patented 5065 4K trigger impresses with its unprecedented extremely short trigger release time. The axial ball bearing (4K= 4 bearing balls, marked in yellow) on the trigger lever guaran- tees completely play-free trigger blade mounting. The resulting harmonic, even-running first stage travel leaves no desires unfulfilled. The very clear contrast when achieving the two stage gives the shooter a very precise contact with the shot.
Type: Two sage trigger
Tilting range (mm): 11
Adjustment of the trigger shoe (mm): 23,5
Trigger blade: 007434
Color of the trigger shoe: Silver
Trigger weight, adjusted (mm): 100
Adjustment of the trigger weight (mm): 30-170
The narrow ridge keeps the line of sight completely free from disruptive optical influences.
Rear Sight 6805 with anti-glare tube
- Rear sight housing made of aluminum
CENTRA Front sight
- Rotationally adjustable.
- Incl. aperture clamping screw
and transparent aperture (Ø M18).
Sight riser block XXL
Sight raiser block (mm): 16
Type: Rear sight and front sight
Aluminuim grooved rail on the lower side: yes
Length of stock (mm): 755-833
Butt plate: ONE Butt plate
Stock type: 3-Position
Material: Aluminum / Stainless steel / Carbon
Stock color: black / silver / red
Length of pull (mm): 300 - 395
Grip size: S
Grip material: Walnut
Grip color: naturally oiled
The revolutionary butt plate, consisting of self-supporting elements, provides previously unseen adjustment options.
The MEC adapter for other butt plate carriers allows the connection of the ONE butt plate to other stocks.
Delivery volume: ONE butt plate, adapter for other butt plate carriers, ONE ISSF filler and tools.
Please find here a video to all adjustment possibilites.
Adjustable: 130 - 150 mm
Weight: 250 g
Tilting of butt plate elements right - left: 14 mm
Adjustable (mm): 130 - 150
Weight (g): 250
Tilting of butt plate elements right - left (mm): 14
The cheek piece can be adjusted steplessly in virtually all directions, which allows optimum adjustment to all marksmen.
Length (mm): 165
Width (mm): 33
Height (mm): 10
Weight (g): 220
Rotation (degree): 360
Fine adjustment height (mm): 25
Fine adjustment Side (mm): 10
Adjustment forward - backward (mm): 100
Rough adjustment (mm): 16
Designed for Air-Rifle 3-Position.
Including variable Aluminum palm rest.
Possibility for mounting individually rail for bench-rest shooting and all common hand stops.
The new grip shape with scalloped inner side enables the shooter to hold the rifle even closer to the body in the shooting position.
Length (mm): 70
Width (mm): 50
Height (mm): 90
Weight (g): 90