Tesro Match air pistol PA 10-2 Basic bench rest

The TESRO PA10-2 Basic is equipped with these standard features:

• Adjustable 3D-Grip
• PA10-2 Basic Compensator
• two gas release holes in the barrel
• continuously adjustable rear sight width
• large loading breach
• cocking lever usable from both sides
• 200bar / 300bar pressure technology
• precisely adjustable pressure point trigger
• incl. basic guncase
• setable to dryfiring

The PA10-2 Basic is equipped with a continuously adjustable rear sight. The sight width adjustments are very easily performed in order to adapt to different lighting conditions.

The cocking and loading of the PA10-2 series is handled with a double sided stainless steel cocking lever. The pellet is always positioned in exact position in the barrel by the cocking pin.

Due to its versatile adjustments, the 3D grip enables the shooter for best possible position of the pistol‘s line of sight. The grip is available in sizes S-M-L for right handed, as well as size M for left handed shooting.

The compensator of the PA10-2 Basic leads the air which propels the pellet through the stainless steel jack opposite of the shooting direction . In doing so the detoured air is used to stabilize the weapon vertically.

In addition the barrel is equipped with two gas release holes, which influence the movement of the air after leaving the barrel in a positive way.

The shot development time of the PA10-2 Basic is very short, due to very close proximity of the pres¬sure regulator to the barrel. The unit is capsuled and is therefore well protected against potentially external damaging factors.